From 627a8943856c70ef12232e5dbaa1397587198f98 Mon Sep 17 00:00:00 2001
From: Martin Michalec <martin@michalec.dev>
Date: Sun, 22 Feb 2026 06:18:43 +0300
Subject: add RS274/NGC samples

---
 res/shapes/circle.nc | 11 +++++++++++
 res/shapes/square.nc | 41 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)
 create mode 100644 res/shapes/circle.nc
 create mode 100644 res/shapes/square.nc

(limited to 'res/shapes')

diff --git a/res/shapes/circle.nc b/res/shapes/circle.nc
new file mode 100644
index 0000000..9d7a755
--- /dev/null
+++ b/res/shapes/circle.nc
@@ -0,0 +1,11 @@
+G17 G20 G90 G94 G54
+G0 Z0.25
+X-0.5 Y0.
+Z0.1
+G01 Z0. F5.
+G02 X0. Y0.5 I0.5 J0. F2.5
+X0.5 Y0. I0. J-0.5
+X0. Y-0.5 I-0.5 J0.
+X-0.5 Y0. I0. J0.5
+G01 Z0.1 F5.
+G00 X0. Y0. Z0.25
diff --git a/res/shapes/square.nc b/res/shapes/square.nc
new file mode 100644
index 0000000..bfcc24f
--- /dev/null
+++ b/res/shapes/square.nc
@@ -0,0 +1,41 @@
+(Exported by FreeCAD)
+(Post Processor: linuxcnc_post)
+(Output Time:2026-02-17 23:27:08.902610)
+/(begin preamble)
+G17 G54 G40 G49 G80 G90
+G21
+(begin operation: Fixture)
+(machine units: mm/min)
+G54 
+(finish operation: Fixture)
+(begin operation: TC: Default Tool)
+(machine units: mm/min)
+(TC: Default Tool) 
+M5
+M6 T1 
+G43 H1 
+(finish operation: TC: Default Tool)
+(begin operation: Profile)
+(machine units: mm/min)
+(Profile) 
+(Compensated Tool Path. Diameter: 5.0) 
+G0 Z15.000 
+G0 X51.768 Y51.768 
+G0 Z13.000 
+G1 X51.768 Y51.768 Z0.000 
+G2 X52.500 Y50.000 Z0.000 I-1.768 J-1.768 
+G1 X52.500 Y0.000 Z0.000 
+G2 X50.000 Y-2.500 Z0.000 I-2.500 J0.000 
+G1 X0.000 Y-2.500 Z0.000 
+G2 X-2.500 Y0.000 Z0.000 I0.000 J2.500 
+G1 X-2.500 Y50.000 Z0.000 
+G2 X0.000 Y52.500 Z0.000 I2.500 J-0.000 
+G1 X50.000 Y52.500 Z0.000 
+G2 X51.768 Y51.768 Z0.000 I-0.000 J-2.500 
+G0 Z15.000 
+G0 Z15.000 
+(finish operation: Profile)
+(begin postamble)
+M05
+G17 G54 G90 G80 G40
+M2
-- 
cgit v1.3